Early Bird
Shop
How to make infinity mirror light-emitting game computer standing desk
post #1

DIY Campaign

Fabien
Tue, Jan 11, 2022 9:58 AM #1

Want to make a futuristic gaming computer desk? It may be ideal for those who like RGB. The mirror's reflection makes a very cool strip of lights from the visual effect of several more layers! Follow my steps and learn! You can watch the whole video on YTB.

Materials List:

Fir finger-jointed boards /Red Toon /FlexiSpot Pro+ legs /Electric circular saw /Bakelite milling

Tape Measure /Pencil /Black spray paint /Soft mirror /Electric drill

Light tape /Double-sided glue /Staple gun /Table Drill

Steps:

1.Design drawings and determine the number and size of wood strips.

1.jpg

2.Select a whole board of  48*96 inch1.22 x 2.44m and cut it to the size of  51*48 inch (1.3 x 1.22m).

2.jpg3.jpg

4.jpg5.jpg
3. Use the table saw to cut the whole board in half. One piece is the table size, i.e., 51*23.6 inch(1.3 * 0.6m), and cut that part of wood into strips.

6.jpg1..jpg

4. Cut the piece of wood into 12 strips and the sizes will be:

25*3inch*2 (64 cm* 8cm * 2 ) /45*3inch*2 (115cm * 8cm * 2 ) /50*1.5inch*2 (127.6cm * 4cm * 2 )

25*1.5inch*2 (64cm * 4cm * 2) /47.6*0.7inch*2 (121cm * 2cm * 2 ) /18.8*0.7inch*2 (48cm * 2cm * 2)

7.jpg8.jpg

9.jpg10.jpg

5.Put black paint on the wooden strip and then wait for the paint to dry.

11.jpg

6.While waiting for the paint to dry, draw the border of the soft mirror on the table board of 51*23.6inch (1.3 x 0.6m) into the size of 46*19.6inch(1.17 x 0.5m). Lay the smooth mirror flat on edge, cut the correct length with a knife, and stick it on the table board. 

12.jpg13.jpg

15.jpg

Reply
Tue, Jan 11, 2022 10:52 AM #2

7. Use a table drill to drill screw holes in the top of the wooden strips after the paint has dried. Then use an electric drill to nail the four strips into a light frame. 

16.jpg17.jpg

8.Place the light frame in the middle of the location of the hole. Pass the lamp power cord from the hole and attach it with double-sided tape to easily stick the lamp in the frame. 

18.jpg19.jpg

0 Reply
SAVE
Tue, Jan 11, 2022 10:53 AM #3

9.Turn the tabletop over and nail the outer frame of the tabletop with a nail gun. After that, remove the soft mirror protection film. 

20.jpg21.jpg

10.Put the frame of the light strip on the soft mirror and seal the surface around the wooden strip. 

22.jpg23.jpg

24.jpg

0 Reply
SAVE
Tue, Jan 11, 2022 10:55 AM #4

11.Trim the groove for the glass with a trimmer and finish the edges with a woodworking chisel

25.jpg26.jpg

12.Make a headphone frame using a table drill to punch a hole at one end of the red toon strip. Then use a band saw to cut out the irregular shape of the wood strip, and use a belt sander for sanding the headphone frame smoothly. 

27.jpg30.jpg

31.jpg


0 Reply
SAVE
Tue, Jan 11, 2022 10:58 AM #5

13.Install the back of the table in FlexiSpot lift legs, and then the table can be used alternately both while sitting and standing.

32.jpg33.jpg

34.jpg

0 Reply
SAVE
Tue, Jan 11, 2022 11:00 AM #6

14.Install the headphone stand and glass desktop.

35.jpg36.jpg

37.jpg

15. Now light up the finished product display.

38.jpg

0 Reply
SAVE
1 2

Suggested Topics

Want to read more? Browse other topics in or views latest topics

AAAAAAAAAAAAA
Post Reply